Images are representations only.
Price
$1,748.00
CAD
Stock
50+ In Stock
- Process Connection - 1/2” Female NPT
- Pressure Range - psig: 0 to 30 (bar: 0 to 2, kPa: 0 to 206)
- Drain - Manual
- Tapped Exhaust - Yes
- Filter - 40 Microns
- Actuation Adjustment Means - Screw
- Temperature Range - -18° to 71° C (0° to 160° F)
- Relief - Non-Relieving
- Mounting - Standard
- Agency Approvals - ATEX
Specifications
Brand
Actuator Type
- Knob
- Screw
Air Consumption
- > 5 scfh
Diaphragm Material
- Nitrile
- Nylon Fabric
Enclosure Finish
- Baked Epoxy
Enclosure, Body Material
- Die Cast Aluminum
Exhaust Capacity - Relieving Units Only
- 0.1 scfm (2.83 Nl/minute) with Downstream Pressure psig: 5 (bar: 0.3, kPa: 30) Above Set Point
Filter
- Polyethylene (40 microns)
- Polyethylene (5 microns)
Flow Capacity
- 0.5 Cv at psig: 150 (bar: 10.3, kPa: 1,034) Supply & psig: 80 (bar: 5.5, kPa: 551) Set Point
- 2.5 Cv at psig: 150 (bar: 10.3, kPa: 1,034) Supply & psig: 80 (bar: 5.5, kPa: 551) Set Point
Media
- Air
- Inert Gas
- Sweet Natural Gas
Mounting
- Body Direct
- Bracket
- Pipe
NPT Connection
- 1/2” NPT Female
- 1/4” NPT Female
Operating Temperature
- -40° to 71° C (-40° to 160° F)
Pressure Range
- bar: 0 to 8
- kPa: 0 to 827
- psig: 0 to 120
Sensitivity
- 1” WC (2.54 cm)
Supply Pressure - Maximum
- bar: 10 to 17
- kPa: 1,034 to 1,724
- psig: 150 to 250
Supply Pressure Effect
- Less than psig: 0.25 (bar: 0.017, kPa: 1.7) for psig: 25 (bar: 1.7, kPa: 172) Change
- Less than psig: 0.5 (bar: 0.035, kPa: 3.4) for psig: 25 (bar: 1.7, kPa: 172) Change
Vent
- Straight
- Tapped Exhaust
