Images are representations only.
FEV-IF/FF Heating Controller
Brand: Danfoss
The FEV is a proportional controller which opens or closes the heating valve as a function of the temperature deviation.
FEV-IF: To be applied in systems with i.e. ceiling, floor or radiator heating. The temperature adjuster/sensor should be mounted on an internal wall at a height of approximately 1.5 meter in such a way that the room temperature can be measured accurately.
FEV-FF: To be applied in systems with i.e. fancoils or induction units. By placing the remote sensor in the room-air inlet of the unit a smaller response time to temperature changes can be achieved which will result in a more accurate temperature control.
Specifications
Brand
Adjustment Type
- Knob
Applications
- Heating: Fancoils/Induction Units - for FEV-FF Typical
- Heating: Floor, Ceiling & Radiator Heating - for FEV-IF Typical
Capillary Length
- 16 feet (5 metres) - Capillary Tube Length for FEV-IF with Integrated Sensor
- 2 + 6.56 feet (2 metres) - Capillary Tube Length for FEV-FF with Remote Sensor
Sensor / Probe Type
- Integrated Sensor
- Remote Sensor
Temperature Range
- 17° to 27° C (62.6° to 80.6° F)
- Heating: Fancoils/Induction Units
- Heating: Floor, Ceiling & Radiator Heating
