Images are representations only.
IHPT Flow-Compensated Temperature Controller
Brand: DanfossIHPT is flow-compensated temperature controller with built-in Δp controller developed to control instantaneous heating of domestic hot water by means of heat exchanger.
Combined with XB06 it is primarily used in district heating systems with varying supply temperature plus high and varying differential pressure and where a high comfort idle temperature is requested. Idle controller is integrated.
Specifications
Brand
Applications
- Differential Pressure Controller
- Proportional Flow Controller
- Thermostatic Controller
Approvals & Certifications
- WRAS
Approvals & Certifications
- DVGW
- ETA VA
- WRAS
Capillary Length
- 1.96 feet (600 mm) - Capillary Tube Length
Cone Material
- MPPE (Noryl)
Diaphragm Material
- EPDM
- MPPE (Noryl) - Diaphragm Support
Differential Pressure
- psi: 14.5 (kPa: 100, bar: 1) - Max.
- psi: 87.02 (kPa: 600, bar: 6) - Max.
Enclosure, Body Material
- Copper Zinc-Lead Alloy [CuZn36Pb2As (CW 602N)]
Flange Size - 1/2” (DN 15)
- 1/2” (DN 15) - PN 16
Flow Rate
- 2.4 to 3 Kvs (m³/hour)
Measuring Range
- pH: 7 to 10
Media
- Circulation Water
- Domestic Hot Water (Chlorine Content, Max.)
- Glycolic Water up to 30 %
Nominal Pressure
- psi: 232.1 (kPa: 1,600, bar: 16)
O-Ring Material
- Ethylene Propylene (EPR)
Operating Temperature - Sensor
- Maximum
Process Temperature
- 2° to 120° C (35° to 248° F)
Sensor / Probe Material
- Copper 2.0090 - Temperature Sensor
Spindle Material
- 316L Stainless Steel - Main Spindle
Temperature Range
- 45° to 65° C (113° to 149° F) - Setting Range
- Differential Pressure Controller
- Proportional Flow Controller
- Thermostatic Controller
