Images are representations only.
ABB Multi-Component Analyzer System
Price
$1,745.00
CAD
Stock
25+ In Stock
ABB’s new ACF5000 is the specialist for emission and process monitoring from the pioneers in FTIR CEMS.
It is available in the 4th generation.
Since introduction in 1993, ABB has sold more than 2000 units.
The standard system design combines the advantages of a FTIR spectrometer, flame ionization (FID) technology and oxygen measurement.
The high resolution FTIR spectrometer provides selective measurement of infrared active gas molecules with high sensitivity and stability.
It simultaneously measures up to 15 components including all relevant pollutants.
Features- Simultaneous measurement of up to 15 gas components
- Proven hot/wet extractive measurement
- Powerful FTIR technology for TOC
- Complete system with a compact and modular design
- Internal references − allow on-going system validation
- Lowest detection limits − suitable to monitor smallest emission limit values
- One single sample inlet for all sample gases with a unique air-driven aspirator pump
- Low cost of ownership
- Communication, control and maintenance via PROFIBUS, Modbus, TCP and Ethernet (OPC)
Specifications
Brand
Measured Components
- H₂O, CO₂, CO, NO, NO₂, N₂O, SO₂, NH₃, HCl, HF, CH₄, CH₂O, VOC, O₂
Environmental Protection
- IP54
Cross-Sensitivity
- < ± 4 % of Measuring Range
Linearity
- < ± 2 % of Measuring Range
Sensitivity Drift
- < ± 3 % in maintenance interval
Response Time
- T90 < 200 seconds, T90 < 400 seconds for HCl, NH₃ and HF
Limit of Detection (2σ)
- ≤ 2 % of Measuring Range
Input Voltage
- 100/200 V 3-Phase, N, PE (Optional, with transformer), ± 10 %, 48-62 Hz
- 120/208 V 3-Phase, N, PE
- 230/400 V 3-Phase, N, PE
Sample Temperature
- 180 ± 2° C (356 ± 3.6° F)
Pressure
- Sample: 900 to 1,100 hPa (0.9 to 1.1 bar, 13 to 16 psi)
Flow Rate
- Approximately 300 L/hr (0.18 cfm)
Storage / Transport Temperature
- -25° to 65° C (-13° to 149° F)
Operating Temperature
- With Air conditioning unit (Option): 5° to 45° C (41° to 113° F)
- Without Air conditioning unit: 5° to 30° C (41° to 86° F)
Humidity
- Maximum 75 % as an Annual Average
- Maximum 95 % for short periods
Weight
- Approximately 300 kg (660 lb)
- Municipal Waste Incinerators
- Biomedical & Sludge Incinerators
- Hazardous Waste Incinerators at Chemical Plants
- Gasification & Pyrolisis Processes
- Cement Kilns
- Solvent Recovery and Destruction
- Crematoria
- Steel and Aluminum Smelters
- Brick, Tiles & Glass Manufacturing
- Catalyst Protection Monitoring
- Combustion Research
Documentation
Certificate
- Declaration of conformity - ACF5000 | EU pdf 98 KB
- ACF5000 | MCERTS pdf 768 KB
- ACF5000 | TÜV pdf 415 KB
- ACF5000 CSA Certificate of Compliance Electrical Safety pdf 125 KB
- ACF5000 IECEE CB Scheme CB Test Certificate pdf 184 KB
- Analytical products Frankfurt | Certificate of Conformity | Restriction of Hazardous Substances | No. 20-02-03925/E20-02-000150/NB0007 | UAE RoHS pdf 546 KB
Manual
- AnalyzeIT Explorer | Asset Management for Analytical Systems | Software version ≥ 2.0 user manua pdf 3.7 MB
- Commissioning instruction - ACF5000 | Multi-component FTIR analyzer system for emission measurements pdf 1.3 MB
- Operating instruction - ACF5000 | Multi-component FTIR analyzer system for emission measurements pdf 4.1 MB
- Measurement & Analytics | Service package | ACF5000 Product guide pdf 404 KB
