Actuator Type
- Gear Operator
- Hand Operated
- Handwheel
Approvals & Certifications
- ANSI-B16.10, B16.34
- API-598/607/609
- ASME -B16.5
- FCI 70-2
- MSS-SP-55
- MSS-SP-68
Cover Material
- Stainless Steel - Bottom Cover
Disc Material
- 316 Stainless Steel
- Alloy 20 or Incoloy
- Aluminum Bronze
- Carbon Steel (A351 Grade CF8M-316/LCB)
- Hastelloy C-276
- Inconel 625
- Monel
- Stainless Steel (A351 Grade CF8M-316) - Disc Pin
Enclosure, Body Material
- 316L Stainless Steel
- Alloy 20 or Incoloy
- Aluminum Bronze
- Carbon Steel (A216-WCB/LCB)
- Cast Stainless Steel (CD3MN)
- Hastelloy C-276
- Inconel 625
- Monel
- Stainless Steel (A351 Grade CF8M-316)
Flange Size - 10” (DN 250)
- 10” (DN 250) - 150#
- 10” (DN 250) - 300#
Flange Size - 12” (DN 300)
- 12” (DN 300) - 150#
- 12” (DN 300) - 300#
Flange Size - 14” (DN 350)
- 14” (DN 350) - 150#
- 14” (DN 350) - 300#
Flange Size - 16” (DN 400)
- 16” (DN 400) - 150#
- 16” (DN 400) - 300#
Flange Size - 18” (DN 450)
- 18” (DN 450) - 150#
- 18” (DN 450) - 300#
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150#
- 2” (DN 50) - 300#
Flange Size - 20” (DN 500)
- 20” (DN 500) - 150#
- 20” (DN 500) - 300#
Flange Size - 24” (DN 600)
- 24” (600) - 150#
- 24” (600) - 300#
Flange Size - 3” (DN 80)
- 3” (DN 80) - 150#
- 3” (DN 80) - 300#
Flange Size - 30” (DN 750)
- 30” (DN 750) - 150#
- 30” (DN 750) - 300#
Flange Size - 36” (DN 900)
- 36” (DN 900) - 150#
- 36” (DN 900) - 300#
Flange Size - 4” (DN 100)
- 4” (DN 100) - 150#
- 4” (DN 100) - 300#
Flange Size - 42” (DN 1050)
- 42” (DN 1050) - 150#
- 42” (DN 1050) - 300#
Flange Size - 48” (DN 1200)
- 48” (DN 1200) - 150#
- 48” (DN 1200) - 300#
Flange Size - 5” (DN 125)
- 5” (DN 125) - 150#
- 5” (DN 125) - 300#
Flange Size - 6” (DN 150)
- 6” (DN 150) - 150#
- 6” (DN 150) - 300#
Flange Size - 8” (DN 200)
- 8” (DN 200) - 150#
- 8” (DN 200) - 300#
Flow Rate
- 105 to 96,185 Cv - ANSI Class 150
- 97 to 48,225 Cv - ANSI Class 300
Gland Packing Material
- Carbon Steel - Gland Packing Flange
- Stainless Steel - Packing Gland Nuts & Studs
Materials of Construction
- 410 Stainless Steel - Thrust Bearing
- Carbon Steel - Bracket Washer, Bracket, Belleville Washers & Low/Upper Bearing
- Metaloplast (316 Stainless Steel+RTFE) - Lower/Upper Bearing
- Stainless Steel - Clamp Plate (Wafer Only), Belleville Washer Cover
Nut & Bolt Material
- Stainless Steel - Clamps, Clamp Bolt, Nuts, Studs
Pressure Range
- psi: 0 to 740 (kPa: 0 to 5,100, bar: 0 to 51)
Ring Material
- Carbon Steel - Retainer Ring
- Stainless Steel - Seat Ring
Seat / Seal Material
- Seat Gasket: Graphite
- Seat Gasket: PTFE
- Seat: 316L Stainless Steel
- Seat: 50/50 STFE
- Seat: Inconel 625
- Seat: PEEK
- Seat: RTFE
- Seat: UHMWPE (Polyethylene)
Shaft Material
- 316 Stainless Steel
- 630 Stainless Steel
- Inconel 718
- K-Monel
- Stainless Steel (XM-19 & Duplex 2205)
Stem Material
- 316 Stainless Steel
- 630 Stainless Steel
- Stainless Steel (XM-19)
Temperature Range
- -73° to 593° C (-100° to 1,100° F)
Torque
- 135 to 59,600 In/Lbs - ANSI Class 150
- 135 to 80,600 In/Lbs - ANSI Class 300