Images are representations only.
MBT 9110 Temperature Transmitter
Brand: DanfossThe MBT 9110 temperature transmitter can be used for converting the Pt 100 / Pt 1000 ohm signal or the thermo couple mV signal to a 4 to 20 mA signal.
The MBT 9110 is a very durable and reliable temperature transmitter with all major marine approvals and can be used together with all our sensors based on Pt or Thermocouple technology.
MBT 9110 transmitters in the standard program are delivered in an enclosure, but are also used as an integrated part of certain temperature sensors.
The transmitter is available as standard or galvanic isolated with or without EEx approval.
Specifications
Brand
Accuracy
- < ± 0.3° C (0.54° F) - Pt 100
- < ± 1° C (1.8° F) - Thermocouple Typical E, J, K, L, N, T, U
- < ± 2° C (3.6° F) - Thermocouple Typical B, R, S
Ambient Temperature Range
- -40° to 85° C (-40° to 185° F)
Approvals & Certifications
- BV
- CCS
- CE
- DNV
- EMC EN 61326-1
- GL
- LRS
- NKK
Environmental Protection
- IP00
- IP54
- IP68
Humidity
- 0 to 98 % Relative Humidity, According to IEC 60068-1, IEC 60068-2-2
Linearization
- < 0.1 % of Full Scale - Linearity Error
Output
- 4-20 mA Current Loop
Output Noise
- Minimum 60 dB - Signal to Noise Ratio
Resistance
- < 0.002 ohm/ohm - Effect of Sensor Cable Resistance (3/4-Wires)
- 5 ohms/Core - Max.
Response Time
- 1 second Standard
- Programmable 1 to 60 seconds
Sensor / Probe Connection
- 2-Wire
- 3-Wire
- 4-Wire
Sensor / Probe Type
- B Thermocouple
- E Thermocouple
- J Thermocouple
- K Thermocouple
- L Thermocouple
- NAMUR NE43 Upscale 23 mA - Sensor Fault Indication
- N Thermocouple
- Pt100
- Pt1000
- R Thermocouple
- S Thermocouple
- T Thermocouple
- U Thermocouple
Shock
- IEC 60068-2-84
Supply Voltage
- < 0.005 % of Full Scale/Vdc - Effect of Supply Voltage Variation
- 1,500 Vac - Insulation Voltage
- 8-35 Vdc
Temperature Coefficient
- < ± 0.01 % of Full Scale/°K
Update Time
- 440 milliseconds
- 5 minutes - Warm-Up Time
Vibration
- 4 G at 2 to 100 Hz as Per IEC 60068-2-6
Wiring
- 1 x 1.5 mm² - Max.
Zero Offset
- 50 % of, Max.
