Images are representations only.
MBT 5560 Temperature Sensor
Brand: DanfossWith MBT 5560 we have combined the technology of our standard temperature sensors and the electrical connections from our MBS pressure transmitters with a new developed electronics which has resulted in a compact temperature sensor with a built-in transmitter.
The MBT 5560 is designed for use in harsh industrial environments where reliable, robust and accurate equipment is required.
Available with a wide selection of process and electrical connections. Can be delivered with a 33 mm extension length which makes it possible to measure temperatures up to 200° C without damaging the built-in electronics.
Features- Designed for use in harsh industrial environments where reliable, robust and accurate equipment is required
- All metal enclosure parts made of stainless steel (AISI 316)
- Output signals: 4-20 mA or Ratiometric 10% to 90%
- A wide selection of process and electrical connections
- Ultra compact design
- Temperature range -50° to 200° C
- Sensor pockets available for applications where emptying the system is not an option
- Based on Pt 1000 technology
Specifications
Brand
Accuracy
- < ± 0.05 % of Full Scale/10 V - Supply Voltage Dependency
- < ± 0.5 % of Full Scale - Typical
- < ± 1 % of Full Scale, Max.
Approvals & Certifications
- ABS
- BV
- CCS
- DNV
- EMC - Emmision (EN 61000-6-3), Immunity (EN 61000-6-2)
- GL
- KRS
- LRS
- NKK
- RINA
BSP Connection
- G 1/2” A Male
- G 1/4” A Male
- G 3/8” A Male
Cable Length
- 6.56 feet (2 metres) Screened Cable
Consumption
- < 4 mA at 5 Vdc - Supply Current Consumption
Current
- 30 mA - Current Limitation
Electrical Connectors
- AMP Econoseal, J Series, Male
- Flying Leads
- M12 x 1
- PG9
- Screened Cable
Electrical Protection
- Short Circuit Protected - Nominal Output Signal
Environmental Protection
- IP65
- IP67
Insulation Resistance
- > 100 megaohms at 100 Vdc
Load Resistance
- > 5 kiloohms at 5 Vdc - Ratiometric 10 to 90 % of Supply Voltage
Materials of Construction
- Glass-Filled Polyamid, PA 6.6
- Polyurethane (PUR)
NPT Connection
- 1/2”-14 Male NPT
Output
- 10 to 90 % (3-Wire) Ratiometric of Supply Voltage - Nominal Output Signal
- 4-20 mA, 2-Wire - Nominal Output Signal (Short-Circuit Protected)
Output Impedence
- < 25 ohms
Pressure Range
- psi: 1,450 (kPa: 10,000, bar: 100) - Max.
Process Temperature
- -50° to 200° C (-58° to 392° F) - Max.
Response Time
- 10 to 35 seconds - Water
- 95 to 310 seconds - Air
Shock
- 500 G at 1 millisecond IEC 60068-2-27 -Shock Resistance
- Free Fall IEC 60068-2-32 -Shock Resistance
Span - Minimum
- 25° C (77° F)
Supply Voltage
- 10-30 Vdc - Polarity Protected
- Ratiometric 10 to 90 % 4.75-8 Vdc - Polarity Protected
- Ratiometric 10 to 90 % 5 Vdc (Nominal) - Polarity Protected
Temperature Range
- -40° to 85° C (-40° to 185° F) - Temperature on Electronics
- -50° to 200° C (-58° to 392° F)
- -50° to 85° C (-58° to 185° F) - Transport Temperature
Vibration
- 4 G at 25 Hz to 2 kHz IEC 60068-2-6
- 7.5 G at 5 Hz to 1 kHz IEC 600868-2-34, IEC 60068-2-36
- Sinusoidal 15.9 mm-pp, 5 to 25 Hz
Wetted Materials
- 316L Stainless Steel, 1.4401
- 316Ti Stainless Steel, 1.4542
